OK great. Please don't try to engage solo on the EQ page with no song loaded in the queue. That would also lead to a crash when closing the EQ window.
Both these crashes will be fixed in the next update.
Open Beta Version 3.4.0
- Edited
Small Logic issue with Auto play switch highlight.
Choose a playlis select a song now click on Auto cue button, Exit the playlist so you are in playlist selection screen now disable the Auto cue button and return back to that playlist song mode you will notice the auto cue is still enabled the arrow is still showing but the auto cue button is greyed out, this also happens in reverse.
This means if you exit Playlist song mode the auto cue button is not communicating with the playlist song mode,i would preffer if it did so i can exit the playlist song mode but still be able to controll it while searching for next song in other areas.
If thats too hard perhaps just dont let it change mode unless you are on the playlist song screen , but that is restrictive to the user as they might need to quickly change mode while still searching elswhere for a new song.
I got this error pop up again i think i touched the home button and it just appeared.
Changing font size in network client will now automatically remember a modification multiplier that will be used for all songs
ABSOLUTELY PERFECT!
It even remembers the font size relationship when you shut down both devices and start up fresh.
And no need for extra settings buttons it just works the way you expect it to.
Briliant work Peter 
- Edited
When copy and pasteing to Lyrics/Chords Editor you seem to end up with a blank first line, it seems to automatically paste to one line down then expected.
Damir Small Logic issue with Auto play switch highlight.
I can confirm. This is not working as expected. Will try to fix it.
Damir I got this error pop up again i think i touched the home button and it just appeared.
I didn't remove this error because I thought it might show some important information when the audio engine fails to start. Can you confirm that you could start playback after tappin on OK?
Damir When copy and pasteing to Lyrics/Chords Editor you seem to end up with a blank first line, it seems to automatically paste to one line down then expected.
I don't see the same behavior by doing this:
1) Open lyrics of Song A
2) Select All -> Copy
3) Open lyrics of Song B which are empty
4) Paste
There is no empty line on top or bottom.
peter Can you confirm that you could start playback after tappin on OK?
Yes i can confirm it plays ok, as it just did it again while i was swapping to ST3.
Extra first line, yes you are correct it works when you do it your way but i get a feeling something is sill fishy i just cant put my finger on it, i know for a fact my ST3 program has somehow created blank first lines on most of my songs and i have no idea to how and why, i make it a point to use the first line with chord of the intros but now somehow i have one blank line on all the songs, i will keep an eye on this as i am bouncing between the two pograms and sometimes i get confused.I have not reloaded any backups to ST3 but i have created recent backup and then loaded it to the Beta it all seemed to work fine but i havent looked at everything closely.
Dont worry about it for now i will keep an eye on this.
I have totally bashed the crap out of trim edit and it works very logically from all respects and seems to be rock solid another well done to you.
Small find might not be worth fixing.
In settings
Waveform seek during playback switch
When you are in this mode and you change the setting the waveform at the bottom of screen does not immediately respond unless you hit stop or play depending on what state you were in,
Once it exits and you return to settings it has set itself up to the new change.
Another small find.
SONG PROPERTIES and EQ buttons HIGHLIGHTING is linked it should be separated and also not effect the Adio play section in a minor degree.
- Edited
peter visually when you click on EQ the Song properties button changes highligting as well,the icons dont highlight seperately so you can destinguish which one is active, not only that but they work the opposite to autoplay highlighting, i like the autoplay highlighting much better as it stands out when active, if you notice the Audio play button when not active changes shadeing as well when the other two are engaged,
Aha I see what is happening, the background is dimmed, I think that is unnecessary as you still want to see things normally you tweak your settings and continue working it should appear seamless.
Its minor but sloppy compared to the rest of the software.I can live with it but id thought id point it out incase you didnt see it.
I would preffer all three buttons to have the same visual logic like the Autoplay button.
And if i had it my way i would have the autoplay button a different colour to distinguish it from the other two, so it stands out more when active from the other two and i would make the arrows that appear in the songs list to be that same colour , this would be visually more usefull and tie things together, being more obvious on stage when active and explain visually to what button does what.
Again smoooother operation.
Waveform seek during playback,
switch does not disable this function anymore, seek is always active.
And first line highlight is still auto active when songs are loaded.
- Edited
Am i going nuts, i cant seem to change the colour of my playlists names i am sure i have done this before as i have some coloured playlist names already that i have programed before, but now i cant figure out how i did this.
Its like when you get the first window of playlist there is something missing, you only seem to get the edit function when you enter the actual playlist.
So how do you change the playlists names colour?
Damir yes i am going nuts, i just found how it works yes you enter the playlist hit the colour icon and choose a colour this does the playlist name but if you hit edit you can select individual songs or all songs then choose colour.Easy!
We have lost the slider volume logic now, it was working perfect and its gone back to what it originaly was Queu controls everything.
- Edited
Damir Waveform seek during playback,
switch does not disable this function anymore, seek is always active.
Can't confirm. Switch works as expected.
Damir We have lost the slider volume logic now, it was working perfect and its gone back to what it originaly was Queu controls everything.
Then you activated "Advanced Queue Mode".
Damir isually when you click on EQ the Song properties button changes highligting as well,the icons dont highlight seperately so you can destinguish which one is active, not only that but they work the opposite to autoplay highlighting,
This is done by iOS. The dialog changes the button state of all buttons to inactive. I can't change that.
peter Advance Queue is definitely off and still the fader is stuck on Queue volume only.
So i dont know what else it could be.
Yes Dopy here has not read the label to the end, Waveform seek DURING ### PLAYBACK.
Its amazing what you have done so far with the limitations of the operating system you have to work with.
I cant wait for this version and all the little improvements .
I am testing the multitrack and have loaded existing files to the tracks, what will happen if i delete this multitrack song will my old ST3 files get deleted.
How are files treated when you create a multitrack, using existing files or importing new files to tracks.
How can i clear an imported track making it empty again?
Will i be able to quickly mute a track on the run?
Damir Advance Queue is definitely off and still the fader is stuck on Queue volume only.
So i dont know what else it could be.
Then you need to have a song loaded from a playlist. Because if you load a song from the song list, it has no playlist assigned and therefore the app does not know which playlist volume to set so it defaults to the Queue volume.
So here are the rules:
1) Advanced Queue Mode needs to be off
2) You need to select a song in playlist not in the song list
Damir How are files treated when you create a multitrack, using existing files or importing new files to tracks.
Multitrack files are written into new folder Multitrack-Files. So if you use an existing song as track, the audio file is copied into the Multitrack folder. This means you can delete the Track (and file) without affecting your original song outside of the Multitrack folder.
Damir How can i clear an imported track making it empty again?
As always! Swipe to the left and select "Delete". This is consistent in all iOS apps. If you want to delete something, swipe to the left.
Damir Will i be able to quickly mute a track on the run?
Either turn down the track volume, or disable a certain track in the settings for all multitrack songs.
peter phew thank god it was the fact i was playing songs fom Song folder, thankfully that explains that, i thought it crashed, its something i did know but totaly forgot as soon as you mentioned it it hit me i am so glad it wasnt a fault.
Im having a bad day thank god this is the last day of lockup.
Good to know i can freely delete multitrack songs and not loose the originals loaded from existing song folder.I assume when i import multi tracks i need to save them in to the multi track folder or they will duplicate otherwise.
And ofcourse swipe left to delete daaaa, thats it im going to bed i am useless today.
- Edited
peter I see. So essentially, the audio tracks would be individual files. Makes me think that a “container file” that would include all of the individual tracks might come in handy here just to keep the songs organized but I don’t know if there is a standard for that already in existence. Would one just load a folder named with the song’s name containing all the tracks?