Airturn BT500S-6 (analog inputs)

salberico51

I am trying to control the volume during playback with a volume pedal plugged into input 1 on the Airturn pedal. I have followed the instructions to calibrate and configure the volume pedal within the Airturn control app. I have the pedal configured to manipulate volume on channel 1. I then go to the Stage Traxx 3 settings to assign “increase volume.” However, Stage Traxx 3 doesn’t seem to recognize the analog input on the Airturn pedal. What am I missing?

Lishy

salberico51 it can’t be done by a volume pedal, only by a footswitch I’m afraid.

peter

I have support for continuos controllers on my bucket list for version 4. But in version 3 you have to stick with switches only.

salberico51

I have figured out how to get Stage Traxx 3 to recognize the analog input > the Airturn pedal has to be in, and programmed to the "mode 7" preset. However, yes the continuous nature of a volume pedal to both increase and decrease playback volume is not an option...yet. Only one action, or the other... Peter, that would be a much appreciated upgrade, and thank you for your awesome program.