iPad Interface USB-C question

OzDoug64

I have an iPad Pro 11" M2. Unlike my older iPads that have a separate audio out, now I have to use an audio adapter that goes from the USB C port. As this port is now used up, is there an interface that allows you to go USB C out into an interface
that allows you to have midi and audio. Please let me know what interface works for you. Thanks

peter

Any class compliant audio interface that is supported by iOS will work fine. Just make sure to grab a so called USB-C printer cable. It is a cable from USB-C to USB-B.

AnthonyB

I've use my old Presonus Studio 24c with an iPad and ST3 before.
A lot of the Presonus stuff is iOS compatible (https://support.presonus.com/hc/en-us/articles/360059975732-PreSonus-Hardware-iOS-iPadOS-Compatibility) but you'll find same with Focusrite, etc.

As Peter mentioned above, key thing to look for is 'class compliant' or check the interface's support pages for confirmation of iOS compatibility.

A good example of something that IS NOT is some of the Universal Audio (UA) interfaces (the Apollo from memory?) as they require software drivers to perform a lot of their capability.

HughB

My UA Volt 1 works great with my iPad A16 2025.
Audio and MIDI sorted.

ThPh

i run ipad 10 +ST via USB c to Arturia minifuse 4. ... works great ! and i can use multitracks