Using MIDI commands to engage Helix tuner at the end of each song in ST3

ZacKelly

Hi team, I'm wanting ST3 to send a midi command to my Helix to turn on the tuner at the end of each song (so I can check my tuning).

Helix manual says it's CC68 with 0-127 (off-on)

I tried the following and none work
[midi: CC68.0@7] - also tried 127 as value
[midi: CC32.03@7, CC68.0@7] - I used 127 as the CC68 value as well
[midi: CCC32.0@7, PC5@7, CC68.0] - also tried 127 as the CC68 value

Any assistance would be greatly appreciated.

Zac

peter

Maybe Helix starts numbering the CC commands at 1 instead of 0. Maybe try CC67 instead 68.

davedroug

i'm sure your writing the systex wrong you have to write like this
[midi@03:19.00: CC110.001@14]
[midi time what CC110 . 001 TURNS OFF @14} IS MIDI CHANEL NO THIS what works on mine for CC on off switch
these are on off times on my vocaliser
[midi@start: CONTINUE]
[midi@00:01.00: CC110.001@14]
[midi@00:54.00: CC110.127@14]
[midi@01:16.00: CC110.001@14]
[midi@02:04.00: CC110.127@14]
[midi@02:26.00: CC110.000@14]
[midi@stop: STOP]

JohnnySolo

I couldn’t get this to work from my iPhone via Bluetooth but I did get it to work from my MacBookpro computer (obviously running st3) that is connected to the Helix. Value 127 turns on the tuner and value 0 turns it off. There must be a midi thru option on the Bluetooth device that isn’t working. Not sure how to find that.

Lishy

JohnnySolo what midi Bluetooth device are you using?

JohnnySolo

Midimittr is the Bluetooth app I use.